The Bridge Panel can be used for highway bridges, assembling gantry cranes, guide beams, bridge erecting machines, hanging baskets, etc. The Bailey truss combination gantry crane uses prefabricated highway steel bridge components to assemble gantry frames, and its span and column height can be adjusted to adapt to different work sites. It is widely used in construction projects such as highways, railways, municipal engineering, construction, water conservancy, lifting and transporting prefabricated components in bridge construction prefabrication yards, and transporting and installing large beams next to bridge piers. 

The Bridge Panel is welded from the upper and lower chord rods, vertical rods, and diagonal rods. There are male and female joints at the ends of the upper and lower chord rods, and a pestle frame connection pin hole is provided on the joint. The chord of the Bailey Bridge  is composed of two No.10 channel steels (back-to-back). Multiple steel plates with circular holes are welded on the lower chord, and there are bolt holes in the upper and lower chords for connecting with the strengthening chord and the double-layer truss. There are also four bolt holes in the upper chord for connecting the support frame, and the two holes in between are used for connecting double or multi row trusses at the same section. The two holes at both ends are used for inter node connections.  Bailey Panel have the characteristics of simple structure, convenient transportation, fast installation, large load capacity, good interchangeability, and strong adaptability.